Bosch CGS15 -5 inch concrete Surface Grinder is a powerful tool which is designed in a way that it offers one of the best dust collection mechanisms which reduces your after work to minimize effort because the machine is capable of the work itself. There is a switch present which would automatically turn off the system in case the load is going out of control, therefore, it saves your time along with protecting the machine for a better duration. Bosch as a company has emerged into the spheres of manufacturing. It has been involved in making technological tools for measurement, lawn tools, accessories as well as power tools. The company started its journey in the midst of the 1880s and has its headquarters in Germany.
The appliances deliver the apt quality as well as durability, that it makes them even more desirable. The tool comes with various components including in it that you do not have to rush to buy them separately and spend another few dollars just to get the complete kit, hence, you have finally started off your work. In addition to that, the machine makes sure that it is stored properly once the work is done as it comes with a carrying case for your convenience. Below listed are the technical specifications to help you have a better understanding about it.
- Power: 12.5 Amps
- Product Weight: 6 pounds
- Item Measurements: 19.75 x 14.75 x 10.75 inches
- Batteries Requirement: No
- Warranty period: 1 year
- Source of Power: Corded Electric
- Material used: Plastic Polymer Construction
- Added Components: Grinder, Carrying Case, Flange Kit, Spanner Wrench, 5 Inch Diamond Cup Wheel, Auxiliary Handle
- Affordability: under 400 dollars
- Mechanism: In built dust collection
- No Load Speed: 9300 RPM
- Automatic shut down system: present
- Voltage: 120 volts AC
- Tool height: 6 inches
- Diameter of wheel: 5 inches
- Spindle thread: ⅝ – 11 UNC
- Handle: convenient handling
- Length: 13.75 inches
- Grinding: Concrete Surface
Below listed are the features of the machine which would help you to know about the machine on a larger scale.
You need power to operate and if the machine lacks that or gives too many jerks while working at a higher speed then you would not be able continue working with it for a long duration. It has an in-built motor which produces 12.5 Amp power and it would produce as many as 9300 rpm. The machine works quite well with the dust collection mechanism. The tool is able to level the concrete with finesse and it does not take much time. It can reach amazing levels which are usually not possible with another tool.
The Bosch instruments have their circuit sorted out in the sense that they work as per the user. When you start the machine, it would give no jerks, instead there would be a soft torque. Later when you are in the middle of the process, the speed would not change all of a sudden. It would remain constant so that you can complete the job at hand with consistency. In addition to that, there is an option of automatic shutdown which shuts the motor in case the load increases so the motor is saved from any wear out. Therefore, in case you do not remember to turn it off on the right time, then too you do not have to bother as the machine would do it for itself. The kind of circuit that is used gives a long life to your machine.
Dust collection mechanism
The machine in itself is a complete set in itself. It has an inbuilt dust collection system. The nozzle stays in the right place. Therefore, you do not need any added tools to work. In addition to that, the machine has a shroud system which would help you get straight at the point. If you wish to grind and the machine has to be placed against the wall, it would directly start with the job keeping the shroud open and it would hit the edge. If you start working without a shroud installed in the machine, then you would be able to see the difference. If there is no shroud then there would be a lot of dirt that would be scattered, however, in presence of it the dust would be minimized to the next level.
The machine is extremely impressive and also has certain features that it brings along with it. It has a sealed switch, ball bearing which are double sealed, lip seal rings which are two in number, a lock (on and off the switch), an auxiliary handle. In addition to that, the machine uses brushes. The brushes have a long life. But they need to be replaced at some time. Therefore, the machine would let you know beforehand when the brushes are wearing out and you can get them so that you might not lose out on your work any day all of a sudden.
The machine with its small size and lightweight works efficiently well. The tool works really good for the grinding process on the floor when compared to larger and bulky tools. To handle the machine as well as to make enough space for the motor, it comes with a fairly large handle. However, you do not have to worry about losing control on the machine because of its large handle. Instead it would give you a firm hand while working on the surface. When you start using the tool, there would be a little vibration which is an obvious factor for any hand grinder. However, it would not be much that your hand stands feeling the fatigue.
Worthy to buy
The tool is worthy enough to be bought under 400 dollars. As it comes with various components included, they are:
- Auxiliary Handle
- Flange Kit
- Spanner Wrench
- 5 Inch Diamond Cup Wheel
- Carrying Case
But if you decide to buy a 5 inch grinder and decide to buy the other components separately then you would end up paying more than what you would ideally pay for this as it comes with all components included. As you would have to purchase a diamond cup wheel, a shroud, etc and that would cost you around let us say 500 dollars or even more.
The machine costs under 400 dollars, if that is okay as per your monthly budget then you can go ahead and have a look at other features. The machine is extremely powerful with the motor power that it works upon which 12.5 Amp. Further, the machine is lightweight which adds to its desirability. It comes in a gorgeous color combination of blue and black color. The machine starts off slow with a slight torque and then gains a consistent speed with minimal vibrations when you are working with it. It would not make your hands tired. They would be able to get the hang of it even if the work requires much effort. The circuit works in a smart manner, when the load is too much to handle, it automatically breaks the circuit so as to save the motor. There is a spindle lock attached which would help you to switch the wheel quickly.
The machine comes with a warranty period which is valid for a year. It is limited, though but you can use this service to make the most of your tool and get the best results and usability out of it. Also, there is a case which would allow you to pack the tool in for easy carrying and storing. In addition to that, there is a user manual for reference which you would be guiding you throughout the working procedure. The machine is there to make your work easier and has been designed with an apt style in order to provide comfort and good experience to the user. Therefore, purchasing it would do no harm.
FAQs (Must Read)
Q: I have lost my user manual. Is there an option to get it?
A: Yes, there is a pdf available on the website and also on Amazon which you can download for free.
Q: What is the diameter of the hose to which this surfacing grinder can be connected?
A: The tool can be connected to a hose of diameter 2 – ½ inches only.
Q: Is the tool very heavy to carry?
A: No, the tool is lightweight. It weighs 6 pounds.
Q: Is there an L-box installed?
A: No, the machine does not come with a L-box. However, there is a carrying case.
Q: Can the speed of the unit be changed?
A: No, unfortunately, this unit is not one of the machines that support variable speed.
Q: Is the cup wheel included with the complete kit that comes?
A: Yes, the cup wheel comes with the kit.
Q: Is the machine capable of removing paint from concrete stairs?
A: Yes, the machine would help you remove the paint.
Q: What kind of respirator mask while using this type of machine?
A: If your usage is indoors, then it is suggested that you should use APF 10 respirator.
Q: Is the machine receptive to the screw on wheels?
A: Yes, Bosch CSG15 5-Inch Concrete Surfacing Grinder accepts screws on wheels.
Q: Can this machine be used for wood?
A: The machine is meant for concrete surface grinding and not for wood as such.
Q: Which kind of dust adapter fits best for this equipment?
A: Any adapter would work that fits best with a dustless vacuum tape.
Q: How much near to a wall can this tool work?
A: This surface grinder can work along with the wall without any issues.
Q: In case you use this tool outside, is there a requirement for a respirator?
A: No, a respirator mask is not required as such if you are not working in a confined environment.
Q: Is there a specific depth guide provided with this grinder?
A: No, you can go as per your convenience.