The demolition hammers usually find their use in the construction sites to remove the surface and lay other foundations or pipes in general. However, Bosch believes in delivering powerful tools for the construction sites so as to provide comfort as well as effectiveness in the tools. The machines are efficient in terms that they are able to remove the surface in a robust manner so that the outcome is received as desired in addition to reducing any vibrations to the hands of the user or any shocks while working on the job site. There is a mechanism to damp the vibrations further and handles that are big enough to accommodate the hands in a comfortable position while using the machine or even while carrying it to the job site. They are also made lightweight so as to reduce any frustration in the user because of the bulkiness of the equipment he is using. The machines are capable of producing a good impact energy. Have a look at the machines mentioned below and the features that suit your work requirement.
Table of Contents
Bosch 11335K 35-Pound 1-1/8-Inch Jack Hammer Kit
The machine weighs barely 38 pounds and with that limited weight it can produce 34 ft.lb of impact energy. The company assures that the product has a paced removal rate than other machines of a similar capacity. It can function at any easy voltage of 120 V. Not just that, the machine promises to reduce the vibrations produced by a minimum of 40 percent at its best. The machine is available under any amount of 900 dollars which is not very expensive as well.
In addition to that, there is a handle that comes with the machine that provides comfort for a better use and a longer duration. Not just that, it helps you to maintain the right position of the body which is needed while working. There are two handles which help in reducing and controlling the vibrations. The machine is further convenient for storage. It can be stored easily without any trouble as it measures 17 x 17 x 20 inches. It uses a corded electric source as power. While working you can change the position of the handle in 360 degrees. The equipment comes inclusive of a 1- ⅛ inch jack hammer kit and a gear box that is covered in grease to increase the lifespan of the machine tools.
Bosch 120-Volt 1-1/8 Brute Breaker Hammer BH2760VCB with Basic Cart
The machine is lightweight, just about 63 lbs and is capable of delivering 35 ft. lb of energy. The match can be carried easily. Further, it can work on an average voltage of 120 V. It can use an AC or a DC source of power. The machine is pre-installed with a mechanism known as Service Minder Brush which helps you to cut the connection in case of an over usage or whenever brush replacement is needed. This equipment has proven extremely well in case of heavy duty work like foundation laying work or in case of extraction of concrete from the surface. It also includes a generator which runs at 2500 watt and it can be carried from one place to another.
The equipment comes with an air cushion in the hammer so as to reduce the vibrations produced while working further, in case of hammering it damps the effect of any shocks produced so as to enhance the level of comfort while working with the machine for longer durations. However, it is a little expensive as compared to other machines. The machine comes inclusive of a 1-⅛ inch hex breaker hammer, a cart (basic), 2 different types of chisel out of which one is a flat chisel.
Bosch DH1020VC Inline Demolition Hammer
The machine is not very bulky when it comes to its measurements. The dimensions of the machine are 30.6 x 17.6 x 7 inches. It uses a composite material for the build quality. Also, there is an average voltage of 120 volts needed to run the machine. You can easily carry the machine because it comes with a handle for comfort. Also, it runs on electricity and not any sets of battery that need to be replaced every now and then. The equipment can be bought under 900 dollars. Also, while demolition in case you wish to reduce the vibrations produced due to the machine then the hammer is laid with an air cushion for better outcomes.
You can also make use of the variety of speed that can again be controlled for the kind of output that you are expecting. In case you wish to work with on angles then there is a lock system which helps you secure a position at as many as 12 different angles and those can be cut differently. Further, you can expect the machine to produce the best impact energy through the work it does. It comes with two handles one at the bottom towards the cutting area and another one at the top, which are padded, but in the opposite direction so you can hold the machine properly and work with perfection even for a longer duration. The machine comes inclusive of a carrying case.
Bosch Bare-Tool BH2760VC 120-Volt 1-1/8 Brute Breaker, Blue
The Bosch Bare-Tool BH2760VC weighs around 63 lbs and uses an electric source. The machine uses a 115 or 120 V to run the equipment. In addition to that it comes with a 2500 watt portable generator. The machine comes inclusive of a 1- ⅛ inches hex breaker hammer. The machine might cost around 1600 dollars so that may worry some budget conscious users. The machine can be imported from the USA. The idea is to provide comfort while using the machine.
The equipment also has a hammer tube that helps to release the heat gained from working and enhances the life of the tool. Also, the tool comes with an amazing warning system in the form of a brush mechanism that cuts off when in case you need to keep an eye on the maintenance or brush replacement. While purchasing the equipment you might think that is too much money that you are spending but in order to back it up the tools come in a box that is greased to expand the tool life and also to ensure that the amount you have invested does not go off that easy.
Conclusion
There are various demolition hammers that can be used on the sites, it depends on you which features suit your work requirement the best and the machine that you could be comfortable purchasing as per the budget. Bosch 11335K 35-Pound 1-1/8-Inch Jack Hammer Kit is capable of producing 1300 bpm. Its handles can be moved in 360 degrees. It promises of reducing the vibrations by at least 40 percent which is a good number to use the machine for a longer duration. The machine does not cost much too as it can be bought under 900 dollars.
Bosch 120-Volt 1-1/8 Brute Breaker Hammer BH2760VCB with Basic Cart is capable of producing 100 bpm. It comes with two different types of chisels. There are shock absorbers and vibration reduces for using the machine more efficiently. But at the same time it is expensive and can be bought under 1500 dollars. Bosch DH1020VC Inline Demolition Hammer is capable of producing 1700 bpm. The machine is capable of working at different angles and it can be set at 12 different positions.
The machine comes with a carrying case and has handles for convenience.The machine is lightweight and costs around 900 dollars. Bosch Bare-Tool BH2760VC 120-Volt 1-1/8 Brute Breaker, Blue is a little heavy and costs like 1600 dollars which might concern some users. However, it delivers a good impact energy. The machine needs lubrication and maintenance for proper functioning.
Watch the Video till End
