Pretty sure you have had a tough time dealing with all the moss, dead stalks, roots, and similar such material. This is nothing but a thatch. What many of us are unaware of is the fact that this thatch is thicker than half an inch can cause serious problems for our lawn. This is because if the thatch becomes too thick then it becomes very difficult for water, air, and other nutrients to seep into the grass. Removing this on time is therefore important to yield the best results possible. This process of removing thatch is called “dethatching”. There are several products available that serve the very purpose of dethatching. Which one to choose among them remains a big question, isn’t it? Making it easy for you, we will talk about GREENWORKS 27022 DETHATCHER that is packed with features and does the job just the way you want it to.
TECHNICAL SPECIFICATIONS
Before investing in any product, one should always have an idea as to what are its technical specifications in order to have a better understanding about its performance. Let us have a look at the technicalities of GREENWORKS 27022 DETHATCHER.
|
Weight of the product |
25.92 pounds |
|
Product dimensions (in inches) |
37.8 x 22.83 x 44.09 |
|
Type of current required |
Alternating current only (AC only) |
|
Type of motor |
Brush |
|
Motor Voltage |
120 Volts |
|
Motor frequency |
60 Hz |
|
Current |
10 Amps |
|
Source of power |
Corded electric |
|
Cutting width |
14 inches |
|
Material of tines |
Stainless steel |
|
Speed |
3700 revolutions/minute |
|
Power button |
Yes |
|
Bale switch |
Yes |
|
Number of depth adjustment positions |
3 |
|
Cord retainer |
Yes |
|
Number of tines |
18 |
|
Handles |
Foldable |
|
Self-propulsion |
No |
|
Warranty |
4 years |
|
Tine depth |
Up to approximately 10 mm |
FEATURES
- ASSEMBLY: The GREENWORKS 27022 DETHATCHER requires the user to assemble the unit as it comes with only partial assembly done. The product comes with a cord retainer, knob and bolt, rubber cushion, 2 screws, and a manual for the owner. The manual has all the directions that are clearly explained thereby enabling the user to set-up the product easily without any professional assistance.
- LIGHTWEIGHT: This dethatcher with dimensions (L x W x H) of 37.8 x 22.83 x 44.09 inches weighs just about 25.92 pounds making it very convenient to use and also to ship from one place to another. However, even though this is light in weight, the manufacturers have not compromised on the sturdiness of the product.
- BUILD QUALITY: GREENWORKS 27022 DETHATCHER comes with the good build quality. It is sturdy and with a padded grip in addition to adjustable handles, the user comfort is taken to next level altogether.
- MOTOR: The 27022 DETHATCHER from “Greenworks” is enabled with a robust brush motor. It is designed for efficiency and absolute comfort. This product is to be connected to a power supply of 120 Volts, 60 Hz, and 10 A alternating current only.
- EASY START: What better than getting started with just a push of a button? That’s exactly what the GREENWORKS 27022 DETHATCHER has to offer. The power button also prevents accidental starting of the dethatcher.
- START AND STOP: To start the GREENWORKS 27022 DETHATCHER, it has to be plug into an approved outdoor extension cord. After this, one needs to press and hold the power button which makes the bale switch operational. Now, the bale switch is to be pulled upward to enable the handlebar to operate and you are good to go. Wondering how to stop the dethatcher? Well, just release the bale. It’s that simple.
- TINES: This dethatcher comes with 18 stainless steel tines that stay sharper for reliable performance.
- CUTTING WIDTH: With a dethatching path spanning a width of 14 inches, you will see the work being done in no time.
- DEPTH ADJUSTABILITY: It is possible to adjust the depth of this dethatcher by turning the hubcaps. One can choose from the 3 different available depths- the first one is approximately 1mm above the ground, the second with a depth of about 3mm above the ground, and the last one approximately 10mm above the ground. In the start, it is advised to go for the first set and then shift to the second one if the tines have become worn.
- STORAGE: With limited space to live in, what has always been a point of concern is how much space will any product require, right? You have nothing to worry about as GREENWORKS 27022 DETHATCHER comes with foldable handles thus limiting the space required with its compact storage.
- ENVIRONMENTAL FRIENDLY: The products from “Greenworks” have a Zero carbon footprint. Having said that, the products that you purchase from this brand will never release even an ounce of carbon emissions. Stay assured that the products that you are using are nowhere responsible for polluting the environment. Also, no more hauling your gas can to the nearest station, no more smelly exhaust, no more fumes, and no mess to deal with. Can it get any better? Why wait when you can now become a proud purchaser of the products manufactured by them.
- WARRANTY: GREENWORKS 27022 DETHATCHER allows the users to enjoy a 4 year warranty period subject to some conditions. This warranty period that is offered is double when you compare it to the industry standards. You can download the user manual from here.
- NOISE: Who would want to use products that produce noise to the extent that you have to think twice before using them? With GREENWORKS 27022 DETHATCHER, relax and worry no more about the noise that’d disturb everyone around. This product does its job quietly and will give you no complaints about noise levels whatsoever.
GREENWORKS 27022 VS SUN JOE AJ801E
How are the two products differ from each other? Let’s look at the features exhibited by them to get a clear understanding.
- Power source: Both of them are electrically powered.
- Depth control: GREENWORKS 27022 DETHATCHER comes with a 3 position depth control whereas, in the case of SUN JOE AJ801E, you’ll find 5 position depth control.
- Motor: GREENWORKS 27022 DETHATCHER has a 10-Amp motor and in the case of SUN JOE AJ801E, the motor is a powerful 12-Amp one.
- Cutting width: SUN JOE AJ801E has a raking width of 12.6 inches. On the other hand, the cutting width of GREENWORKS 27022 DETHATCHER is 14 inches.
- Warranty: The warranty period of GREENWORKS 27022 DETHATCHER is worth a mention as it comes with a 4 years warranty period and SUN JOE AJ801E follows the industry standard of a 2 year warranty period.
- Weight: SUN JOE AJ801E is slightly heavier (27 pounds) when compared to GREENWORKS 27022 DETHATCHER (25.92 pounds).
- Product dimensions: SUN JOE AJ801E is a little smaller (21 x 23 x 41 inches) than GREENWORKS 27022 DETHATCHER (37.8 x 22.83 x 44.09 inches).
GREENWORKS 27022 PARTS
The list of parts in case of GREENWORKS 27022 DETHATCHER is:
- Cover for motor
- Motor assembly
- Gearcase assembly
- Tines assembly
- Housing
- Base for tines
- Tines cartridge
- Pins
- Tines
- Tire for the front wheel
- Bolt, nut, and washer
- Front-wheel
- Cord retainer
- Bracket for tines assembly
- Shaft for high adjustment
- Bush for the front wheel
- High adjustment knob
- Spring for high adjustment
- Baffle for high adjustment spring
- Rubber cushion
- Lower handle
- Upper handle
- Knob
- Bolt
- Rear-wheel assembly
- Hang for the power cord
- Ringer for the power cord
- Shaft for the rear wheel
- Support for motor
- Little cover
- Big cover
CONCLUSION
Dethatching has left many wonders about how easy or difficult will it be. But, with GREENWORKS 27022 DETHATCHER, you can sit back and worry less for this is the product you’ll surely not regret buying. This easy to use product enables you to adjust the tine height, is easy to assemble, start, and use. With it being environmentally friendly i.e no emissions being released into the air, you no longer have to deal with the fuss and mess that the gas-powered products are associated with. Wait no more! Grab this GREENWORKS 27022 DETHATCHER and see this work like magic!
FAQs (Must Read)
- How often should one dethatch the lawn?
Ideally, almost all lawns require dethatching to be done once a year.
- Can dethatching be done directly without mowing?
Before dethatching your lawn/garden, make sure that it is already mowed to a height of approximately 2 inches. This will ensure lengthening the life span of the tines and also prevent unnecessary overload of the motor on the dethatcher.
- How to clean the plastic parts of the dethatcher?
One should always make use of a clean cloth to remove the dirt, dust, oil, grease, etc. Never make use of any kind of solvents to clean the parts as this might lead to damage.
- What is the use of a cord retainer?
The cord retainer prevents the extension cord from disconnecting from the power cord while the mower is still in use.
- Which height level for the wheels to choose for dethatching?
For optimal performance, it is advised that the height of both wheels is set to the highest. Adjust the height to a lower one only when required.
- Why is there a circuit breaker enabled in the dethatcher?
Not all dethatchers come with a circuit breaker. However, if your dethatcher has a circuit breaker, then it is equipped to protect the supply circuit from shortcircuit overloads.
- Can the thatching of the lawn be done after it rained?
One should make it a point to use the dethatcher in dry weather conditions. Using the product in wet or damp conditions is a big NO! Also, the best time to dethatch your lawn in spring or fall.
- Can a dethatcher work backward?
Most of the dethatchers are designed to work in the forward direction. This means that making them or forcing them to work backward may damage the lawn and also break the tines.
- What is the use of rubber cushions?
Rubber cushions fit between the base of the handles and the machine and also serve the purpose of acting as dampeners.
- Is it possible to fertilize the lawn after dethatching?
After dethatching, it is the best time to aerate your lawn. Having done that, one can go about fertilizing.
- Can a regular rake serve the purpose of dethatching?
A regular leaf rake will only remove a part of the thatch and also might lead to damaging your lawn. Hence, on the safer side, always use a good dethatcher to remove thatch from your lawn.
- Why does the dethatcher produce a whistling noise?
The cog belt could have slipped thereby producing a whistling noise. It may also be the case wherein some foreign objects might have entered the cylinder. Removing the foreign objects from the dethatching cylinder will solve your problem in no time. - How does a dethatcher deal with sprinklers on the lawn?
You will have to slightly lift your dethatcher when you are to dethatch the sprinkler area. The best advice, however, would be to leave the sprinkler area (also a little area around it).
Top 10 Trending Tools (Don’t Miss)
miller 215 vs lincoln 210
wen 6550 vs 6552
worx pegasus vs keter
kobalt table saw review
echo cs 490 vs husqvarna 450
bosch 300 series shem63w5-n
skil 3540-01 vs 3540-02
dc9099 vs dc9096
ryobi p122 vs p108
Watch the Video till End